Key Features:

ROBUST CASE WITH A CLASSIC FINISH
Ziegler Panel Meters are housed in a Robust case made of glass filled Polycarbonate. This case is self extinguishing and non-drip which conforms to international regulations UL 94 V-0, resulting in no danger to the equipment below meters, since no burnt plastic material falls on other equipment.

This light weight material has very high mechanical strength and flame-retardant properties.. Tensile strength at yield is as high as 665 kg/sq.cm. compared to 400 kg/sq.cm. of conventional ABS. This case eliminates the problem of corrosion and earthing. Exceptional dielectric strength of 18 kV/mm permits use of high test voltages.

BUILT IN TRANSDUCERS
Built-in Transducers forming a single unit with the meter used for Power, Frequency and Power factor measurements. Inbuilt transducers are available in 96 and 144 mm square meters. Built-in Transducer PCB’s with SMD manufacturing technology ensures the quality & reliability of the product.

CONVENIENT HOUSING FOR EASY MOUNTING
Housing design is so convenient that the installation is possible in various grid system. The instrument is suitable for mounting in Control Panel, Switch Boards and machine consoles even up to a wall thick ness of 25 mm. Design facilitate for mounting meters in vertical and horizontal rows in a single cut-out. Built-in Transducer PCB’s with SMD manufacturing technology ensures the quality & reliability of the product.

MOUNTING
Mounting is possible through S type screw clamps which can be mounted on any two
opposite sides of the meter either left and right or top and bottom All fasteners are
resistant to excessive vibration and shock. The “S” type screw clamp supplied as
standard equipment is suitable for control panel of thickness < 25mm

LEAF SPRING MOUNTING
Optionally an easy mounting leaf spring is also available for thickness of > 1 mm panel.

Advantages of leaf springs.
1. Time saving installation since they snap into the panel very easily & speedily.
2. Front mounting into various grid systems.

INTERCHANGEABLE SCALES
Scale replacement is quick and simple with no loss of accuracy and without tools. Interchangeable scale facility minimizes the carrying cost of inventory substantially. It also helps in reducing the lead times.
A permanently fixed click fit window need only be opened for changing the scale.

SELF LIFTING TERMINAL CLAMPS
The terminal screws are connected to the terminal clamps. Whenever we unscrew, the terminal clamp gets lifted along with the terminal screw. This simplifies clamping of connector/wires.

CONVENIENCE FEATURES
Bezels and front glass can be replaced easily. Material used for face plate is float glass. Optionally Anti-glare glass faceplate and transparent polycarbonate face plate are also available. Specially designed back cover eliminate risk of contact with live parts. Terminal protection with back cover conform to IP 20 as per IEC 529 (DIN 40050). The holes on the back cover facilitate to check the voltage without removing it.